Electrofusion saddle fitting for PE gas pipeline
The technology of hot tapping and plugging under pressure for PE gas pipeline is suitable for the construction of hot tapping and plugging under pressure for Urban Gas PE pipeline. Under the condition of ensuring the normal operation of PE gas pipeline, the construction operations such as adding bypass, replacing or adding valve and replacing pipe section are carried out for PE pipeline. To avoid the economic loss caused by the shutdown of construction operation and the adverse impact on social production and life.
Applied pipe range: dn110~dn400 SDR11 and SDR17
Applicable medium: natural gas
Raw material grade: PE100
The upper and lower half pipes of PE electrofusion saddle fitting are fastened to the gas pipeline through stainless steel stud bolts and nuts. The overall strength of the saddle fitting is greater than that of PE pipe. The strength reinforcement of the electrofusion welding part of the upper half pipe can effectively prevent the leakage risk caused by the strength defects generated during electrofusion welding of saddle fitting over time or the leakage risk caused by soil pressure stress on the electrofusion position of the upper half of the electrofusion saddle fitting with the passage of time after backfilling of the construction.
Tel:0086-188 7028 5586
Address: No.111 Tantang Road, High-tech Development Zone in
Xinyu City, Jiangxi Province,China
COPYRIGHT@Xinyu FeiHu Pipeline Technical Equipment Co., Ltd.